This product has now evolved into Efflutrack see details on Efflutrack page Irrisafe Traveiling Irrigator shut off system won the Supreme Innovation award at 2011 National Fieldays. Controlling the problem of renegade irrigators the shut off system shuts off the flow of effluent when the traveling Irrigator stops traveling. Irrisafe operation does not rely on batteries, thus making it very reliable and suitable in all areas. New FDE rules will mean you have to have a system which is set to deliver a certain performance rating and have less then a 20% variable within the system in order to comply.. i.e... even pressure and flow at all times, even application with a set DU rating of less than 1.25. Irrisafe is designed to comply with all new FDE parameters. GPS Tracking kit an optional extra: The system includes the : (1) GPS/battery monitor/battery / case, (2) 2 x batteries with battery holders/protectors, (4) 2 x SD cards, (5) battery charger..... Case size is 180 high, 180 long and 100 wide and is a purpose built from polyethylene Battery charge life is predicted to be one month of average use. The SD card can be swapped over regularly, when the battery is being swapped, and downloaded. Downloading is easy and tracking transposes onto Google maps, which automatically becomes available when a file is opened FDE good practice on Automatic Cut-offs: The following fail-safe devices should be installed to protect the system and the environment. High and low pressure cut-offs should be installed for the FDE pumping system. For systems with travelling FDE irrigators, it is highly recommended an automatic shut off be installed that turns the system off when the irrigator FDE good practice on Automatic Cut-offs: The following fail-safe devices should be installed to protect the system and the environment. High and low pressure cut-offs should be installed for the FDE pumping system. For systems with travelling FDE irrigators, it is highly recommended an automatic shut off be installed that turns the system off when the irrigator
Supreme Award winner overall National Fieldays 2011 NEW 2013 Most desired product FDE good practice on Automatic Cut-offs: The following fail-safe devices should be installed to protect the system and the environment. High and low pressure cut-offs should be installed for the FDE pumping system. For systems with travelling FDE irrigators, it is highly recommended an automatic shut off be installed that turns the system off when the irrigator
Efflutrack is a fail-safe device for travelling irrigators, designed to automatically shut the pump off in the event of an issue. The system can be controlled remotely by a cell phone and will send an alert to the farmers phone in the event of any irregularities with the application. Efflutrack is a simple to use system that is designed to be robust and fit for purpose and is able to be adapted to suit the farms exact needs depending on the number of pumps or irrigators they run. These units can be sent ready to use directly to the farm and are simple to install all it requires is an electrician to wire the pump unit in and someone to attach the irrigator unit and magnets to the irrigator, and it is good to go. Each unit has an up front cost and small a monthly connectivity cost for the sim cards with the price depending on the service provider and the number of pumps and irrigators the farms system will run. An annual servicing fee that will include a yearly visit for battery replacement and servicing of any faulty parts as well as one further call out to cover any other damage that many occur. Efflusafe is all about making your farming ezy
This special high presure irrigator is designed so it can shift large amounts of effluent fast... fast travel means you can comply with low application rates, but for that you need pressure and a unit which can spin the boom In the event that you want to put more effluent on you simply slow the unit down. There are almost an infinite number of gear/speed settings. This unit comes in 11 metro boom options only, 3 runs to a hectare with a 30-40 metre spread! (see the video clip) WITH STAINLESS STEEL CABLE! FOR ENHANCED RELIABILITY AND DURABILITY FDE good practice guideline on Application Uniformity All liquid FDE land application systems must achieve a DUuq (as defined in the accompanying FDE Design Code of Practice) of no greater than 1.25.
These pumps are made specifically to shift effluent and sludge at variable pressure. The unique Rubber Lobe pump system means lots of pressure and no siphoning. Drive this pump via PTO or stationary engine for mobility or variable speed, or alternative electric drive for a permanent but FDE compliant variable set up. Meet your min application rates when it counts and deliver more when you can (high soil moisture deficit) Imported from Eisele a german manufacturer which has been manufacturing effluent management equipment since 1880. We have a pump solution for most challenges. If you have a real desire to solve your effluent issues for good, call us today.
This 15kw 600litre per minute German made pump is designed to pump sludge or effluent at high pressure (3-7 bar) The unique rubber lobes push the effluent where you need to to be. This unit is self priming and poised for action. Beats any open chamber impeller pump hands down. The unit is to be mounted on a concrete pad next to your pond or sump and is self priming. No pontoons or access issues.
A top of the line new pump that meets every requirement to pump eflluent from a pond, or water from a dam, in LARGE VOLUMES and at a GREAT PRESSURE. The benefit of this type of pump is, its ezy to install (no electricity needs) and versatile. If you can pump your pond empty in one go this may be a good solution. Check with us that your total plan meets FDE good practice standards! The PTO pump solution allows you to vary pressure and flow to a set parameter, meeting both your minimum application rates and your increased rates, when soil moisture deficits allow for additional applications.
Storage of effluent is taking a whole new turn with an ECO BAG from Wieffering (EU) by TechniPharm . This great solution is not only very cost effective it also means you do need limited engineering as all is fully contained and you are fully covered for unwanted added rain water and objects which may get into the pond No issues with liner gas bubbles as this system is fully contained Less evaporation of valuable N , almost no smell and no crusting ever. System includes full mixing solutions. The principle of ECOBAG are simple and outlined in the information pack.. Effective storage N captured ( in open pond up to 60% goes up in smoke and evaporates as a greenhouse gas ( not yet an offence but will come as NZ severely lagging) Significant reduced or No smell (an issue now for many resource consents) Safe ( you can not fall into it (OSH) Easy install on all types of ground ( often an issue with alternative systems) Easy to expand, just put an other one next to what you already have, no need to rip up Reduced earthwork cost ( just an embankment) No engineering cost all drawings provided
The Turbo T™ from TechniPharm is designed to make your farming ezy...blockages can be a pain. Turbo T™ will create a vortex in the chamber which will aid the breaking up of debris before it enters the boom If a blockage occurs all you have to do is open the chamber for access, rather than taking the whole boom to bits.
Standard pressure gauges do not work well for effluent, they block. The TechniPharm specially developed effluent gauge does not block and is particularly suitable for monitoring effluent system pressures at any point from pump to irrigator. FDE good practice on Pressure Variation The FDE land application system must be designed to apply within +/- 10% of target applied depth with acceptable uniformity and application intensity in any location. In general the total pressure at the applicator(s) should not vary by more than: 20% of the design operating pressure at any point in the system Provision must be made for pressure measurement at the outlets/sprinklers as well as at the pump.
The Eisele range of stirrers is a very powerful solution to stirring sumps and ponds. Horizontal stirrers stir a pond in a circular push around motion. Conventional stirring (vertically) is ok for small sumps, but not great for stirring various levels of deeper sumps or ponds. The stirrers come in various models and options for ponds, sumps or above ground ponds.
This unit is specially designed for pumping effluent/sludge from ponds. Designed originally as a commercial pumping system it can also be engaged where large amounts of effluent need pumping and where electricity supply is limited or too far away from transformers. It can also be set up as a mobile drive unit for pumps in line or with hydraulic pond stirrers. Price on application. Custom built.